Your Part. Printed in 24 Hours.
FDM, SLA and SLS under one roof. Prototypes from 24 hours, small series in days. Pickup in Rostock or shipping Germany-wide.
In brief
What does 3D printing in Rostock cost – and how fast will I get my part?
Calculate the indicative price for your part in the cost calculator above – upload your STL file, choose process and material, and see the price instantly. Autoskope produces in Rostock with three in-house technologies: FDM on the Raise3D Pro2 Plus (build volume up to 305 × 305 × 605 mm), SLA on the Formlabs Form 3+ (25–100 µm layers for the finest detail) and SLS on the Formlabs Fuse 1+ (Nylon 12, with no support structures). Simple prototypes are often ready for pickup within 24 hours, small series within a few days. Collect your part directly in Rostock or have it shipped across Mecklenburg-Vorpommern. The same machines build the housings of our own GPS trackers – so you get proven industrial quality, not armchair theory.
- 3
- Processes: FDM·SLA·SLS
- 24 h
- Express prototype
- from 1
- Unit quantity
- Rostock
- Local pickup
Proven on Our Own Products
The housing of our GPS tracker Autoskope V3 is SLS-printed from Nylon 12 (PA12) – on the same Formlabs Fuse 1+ that is available for your projects. The result: an IP66-certified, waterproof housing measuring 100 × 60 × 30 mm that reliably operates in vehicles at temperatures from -20°C to +60°C.
We know the limits and strengths of each process from our own experience – not just from datasheets. This practical expertise flows into every consultation.
What Does Your Part Cost? Calculate Now.
Upload your STL file and get an instant price estimate for your 3D print.
Drag an STL file here or click to select
Maximum file size: 50 MB · STL (binary or ASCII)
Upload an STL file to get a cost estimate.
Formlabs Fuse 1+ 30W
Industrial SLS quality for functional end-use parts and small series. The 30W fiber laser enables fast print times and access to high-performance materials like carbon fiber reinforced nylon.
Available SLS Materials
Available SLA Resins
+ over 30 more validated materials available
Formlabs Form 3+
Highest detail resolution through Low Force Stereolithography (LFS). Perfect for detailed prototypes, dental and jewelry applications with crystal-clear surface quality.
Raise3D Pro2 Plus
Large-format FDM printing with industrial quality. The enclosed build chamber enables printing of demanding materials like ABS, ASA and Nylon. Dual extruder for multi-material and soluble supports.
Supported Materials
Material temperatures up to 300°C possible – ideal for engineering plastics
FDM Materials in Detail
Each material has its strengths. Choose the right one for your application – we are happy to advise you.
PLA
Polylactic Acid
- Easy to print
- Low odor
- Biodegradable
- −Low heat resistance
- −Brittle under impact
PETG
Polyethylene Terephthalate Glycol
- Good impact resistance
- Food safe (FDA)
- Minimal warping
- −Can be prone to stringing
- −Harder to sand
ABS
Acrylonitrile Butadiene Styrene
- High impact resistance
- Good heat resistance
- Easy to post-process
- −Strong fumes during printing
- −Prone to warping
TPU
Thermoplastic Polyurethane
- Highly flexible
- Extremely impact resistant
- Oil and solvent resistant
- −Slower printing required
- −Difficult on Bowden extruders
ASA
Acrylonitrile Styrene Acrylate
- UV resistant
- Weather resistant
- ABS-like strength
- −Fumes during printing
- −Warping possible
Nylon
Polyamide (PA6/PA12)
- Extremely strong
- Self-lubricating
- Wear resistant
- −Highly hygroscopic
- −Drying before printing required
FDM vs. SLA vs. SLS – Which Fits?
RecommendedSLS (Fuse 1+) | SLA (Form 3+) | FDM | |
|---|---|---|---|
| Printer | Formlabs Fuse 1+ 30W | Formlabs Form 3+ | Raise3D Pro2 Plus |
| Resolution | 110 µm | 25-200 µm (50µm XY) | 10-400 µm |
| Build Volume | 165×165×300 mm | 145×145×185 mm | 305×305×605 mm |
| Support Structures | No | Yes, light | Yes, required |
| Surface Quality | Good (slightly grainy) | Excellent | Good |
| Strength | Very high | Medium | Medium-High |
| Cost | Higher | Medium | Low |
| Ideal for | Functional parts, small series | Detail models, dental, jewelry | Prototypes, housings, large parts |
Why Your Next Part Should Come from Rostock
- Professional Formlabs printers (Fuse 1+ & Form 3+)
- All processes (FDM, SLA, SLS) under one roof
- Local partner in Rostock – personal consultation on site
- Express service with next-day express possible
- Wide material selection from PLA to carbon fiber nylon
- From single pieces to small series
Not Sure Which Process?
Send us your file or describe your part – we'll recommend the right process and material. Free, in under 24 hours.
Schedule a CallFrequently Asked Questions
We accept STL, STEP, OBJ, and 3MF files. For best results, we recommend binary STL files with a resolution of at least 0.1 mm.
Yes! As a local 3D printing provider in Rostock, we offer direct pickup. You save shipping costs and get your part faster.
FDM is suitable for robust prototypes and large parts with various material options (PLA, PETG, ABS, TPU, Nylon). SLA (Form 3+) offers the highest detail resolution for delicate models and smooth surfaces. SLS (Fuse 1+) enables complex geometries without support structures and delivers industrial-quality parts. We are happy to advise you!
We offer a wide range: PLA (easy, eco-friendly), PETG (robust, food-safe), ABS (impact-resistant, heat-resistant), TPU (flexible), ASA (UV-resistant for outdoor), and Nylon (extremely durable). Each material has specific pros and cons – we help with selection.
The Fuse 1+ with 30W laser enables fast print times and high-strength parts from Nylon (PA12, PA11), including glass or carbon fiber reinforcement. No support structures needed, up to 80% powder recycling, and parts are immediately functional.
Over 30 validated materials: Standard Resins in various colors, Tough Resins with ABS-like strength, Flexible and Elastic for rubber-like parts, High Temp up to 238°C, and biocompatible Dental and Medical Resins.
Standard orders: 3-5 business days. Express service: 24-48 hours. For urgent projects, the Fuse 1+ enables next-day express – finished parts the next working day.
Yes, especially SLS parts from the Fuse 1+ are suitable for functional end-use parts and small series. SLA parts from Tough or High Temp Resin are also suitable for demanding applications.